Wanted : Bandit 600 stock silencer

[ALBERTONE]

I wrongly assumed that there wouldn't be a ditch in the country that wouldn't have a stock bandit silencer in it. How very wrong i was. Surely there's one out there waiting to be discovered

I've picked up an n600 that would wake the dead so if there's anyone out there with one or has a lead on where I might find one the neighbours and I would greatly appreciate it

[CarolVordermansGearbox]

The MK1 and 2s stock silencer was one piece with the link pipe. A lot of these were angle grinded so a slip on can could be fit for more noise.

A lot also have the link pipe welded to the headers because the collector box rots very easily.

So have a look at how yours is.. you'd probably be better off just buying a full length, baffled slip on can

[nednedned]

i got one of these db killers. but you do have to drill a hole in the exhaust. I had to use a longer bolt with a nut. There`s 3 different diameters.

https://www.aliexpress.com/item/1PC-...ceBeautifyAB=0

[acdc]

Originally Posted by nednedned

i got one of these db killers. but you do have to drill a hole in the exhaust.

https://www.aliexpress.com/item/1PC-...ceBeautifyAB=0

i have one of them if anyone want it, its currently in some box somewhere, i could dig her out

[ALBERTONE]

Thanks for the replies guys.ON closer inspection the exhaust on the bike is welded at the can and collector and is now one piece. So ideally I would like a full standard exhaust if possible