Old 6th October 2019, 04:49 PM #1
efanton efanton is online now
WSB Contender
 
Join Date: Jan 2016
Location: North Cork
Posts: 711
Motorbike: Suzuki GSX 600F
efanton efanton is online now
WSB Contender

 
Join Date: Jan 2016
Location: North Cork
Posts: 711
Rides: Suzuki GSX 600F
Acf-50

Doing quite a bit of work to the bike at the moment.

repaired some small cracks and scratches in one of the fairings, thats currently with Ger Conlon for a respray.

Removed the Exhaust, have gone over it with very fine grit wet and dry to remove small tar spots and a little bit of corrosion. Also got the bit near the collector to actually look like stainless steel again. Next step is a thorough polish with AutoSol to remove scratches and blemishes, That's going to take a while, but while I wait for the fairings plenty of time to do it.

Have removed whats easily removable from the bike and thoroughly cleaned the bits that never get cleaned.

So with all that work done, and a good bit still to go I thought now was the time to try some ACF-50 to help keep the bike looking as good as it will.


The question I have is do I apply final polish to the paintwork before I apply the ACF, or can I apply the ACF and polish over.

Can I apply polish over the ACF in the future, or is it a case of a thorough clean that might remove the ACF, then polish, then apply a new coating of ACF?

Not quite sure how to get the best results from the ACF and a good polished finish.

Last edited by efanton; 6th October 2019 at 04:52 PM.
efanton is online now   ReplyReply
Old 6th October 2019, 09:18 PM #2
seano seano is online now
Clubman
 
Join Date: Oct 2018
Posts: 165
Motorbike: CRF250L
Modifications: Braaap
seano seano is online now
Clubman

 
Join Date: Oct 2018
Posts: 165
Rides: CRF250L
Mods: Braaap
Re: Acf-50

ACF will be gone after washing and you will need to reapply, generally the stuff you apply acf to doesn't need polishing. I just polish fairings, mudguards, bits of plastic etc and acf everything else. I'd polish before acf if you are planning to use the two together on a fairing etc
seano is online now   ReplyReply
Old 7th October 2019, 12:20 AM #3
efanton efanton is online now
WSB Contender
 
Join Date: Jan 2016
Location: North Cork
Posts: 711
Motorbike: Suzuki GSX 600F
efanton efanton is online now
WSB Contender

 
Join Date: Jan 2016
Location: North Cork
Posts: 711
Rides: Suzuki GSX 600F
Re: Acf-50

Quote:
Originally Posted by seano View Post
ACF will be gone after washing and you will need to reapply, generally the stuff you apply acf to doesn't need polishing. I just polish fairings, mudguards, bits of plastic etc and acf everything else. I'd polish before acf if you are planning to use the two together on a fairing etc
thanks. that exactly what I need to hear
,
so seriously good wash, polish, then apply ACF is the procedure.

which would mean ACF treatment is not twice a year as some websites claim, but after every time you give the bike a good wash and polish
efanton is online now   ReplyReply
Old 7th October 2019, 04:25 AM #4
seano seano is online now
Clubman
 
Join Date: Oct 2018
Posts: 165
Motorbike: CRF250L
Modifications: Braaap
seano seano is online now
Clubman

 
Join Date: Oct 2018
Posts: 165
Rides: CRF250L
Mods: Braaap
Re: Acf-50

Depends on what you wash with, if it's just water it will probably be ok but if you are using a cleaner you'd want to reapply.
seano is online now   ReplyReply
Old 7th October 2019, 08:45 AM #5
Bruce's Avatar
Bruce Bruce is offline
Supporter
 
Join Date: Aug 2010
Location: Galway
Posts: 2,787
Motorbike: MT-10, ZX6R Track
Bruce Bruce is offline
Supporter

Bruce's Avatar
 
Join Date: Aug 2010
Location: Galway
Posts: 2,787
Rides: MT-10, ZX6R Track
Re: Acf-50

Why put ACF50 on paintwork?
It's a corrosion inhibitor...
Polish your paint, ACF your metals...
Bruce is offline   ReplyReply
Old 7th October 2019, 09:00 AM #6
PADDYOT's Avatar
PADDYOT PADDYOT is online now
Veteran Racer
 
Join Date: May 2006
Location: 0 to 60 in about 3.2 sec
Posts: 2,861
Motorbike: Yer aul wan
Modifications: Sphincter tightener
PADDYOT PADDYOT is online now
Veteran Racer

PADDYOT's Avatar
 
Join Date: May 2006
Location: 0 to 60 in about 3.2 sec
Posts: 2,861
Rides: Yer aul wan
Mods: Sphincter tightener
Re: Acf-50

Quote:
Originally Posted by Bruce View Post
Why put ACF50 on paintwork?
It's a corrosion inhibitor...
Polish your paint, ACF your metals...
That's what I was thinking. It's wouldn't harm paintwork but I wouldn't go to the bother of actually deliberately applying it to plastics.

I've used ACF50 on the engine and underside of the bike, exhaust headers etc and was actually quite surprised at how quickly/easily it washed off.
PADDYOT is online now   ReplyReply
Old 7th October 2019, 09:37 AM #7
TuneR TuneR is offline
Novice Racer
 
Join Date: Oct 2017
Location: Co. Limerick
Posts: 76
Motorbike: Kawasaki Ninja 650
TuneR TuneR is offline
Novice Racer

 
Join Date: Oct 2017
Location: Co. Limerick
Posts: 76
Rides: Kawasaki Ninja 650
Re: Acf-50

Quote:
Originally Posted by PADDYOT View Post
I've used ACF50 on the engine and underside of the bike, exhaust headers etc and was actually quite surprised at how quickly/easily it washed off.
How long after you applied it did that take? I couldn't get it off the small brush of places id missed after spraying it on. Just left it in the corner of the shed.
TuneR is offline   ReplyReply
Old 7th October 2019, 12:20 PM #8
PADDYOT's Avatar
PADDYOT PADDYOT is online now
Veteran Racer
 
Join Date: May 2006
Location: 0 to 60 in about 3.2 sec
Posts: 2,861
Motorbike: Yer aul wan
Modifications: Sphincter tightener
PADDYOT PADDYOT is online now
Veteran Racer

PADDYOT's Avatar
 
Join Date: May 2006
Location: 0 to 60 in about 3.2 sec
Posts: 2,861
Rides: Yer aul wan
Mods: Sphincter tightener
Re: Acf-50

Quote:
Originally Posted by TuneR View Post
How long after you applied it did that take? I couldn't get it off the small brush of places id missed after spraying it on. Just left it in the corner of the shed.
I sprayed it directly on (aerosol can), spread it around and removed excess using a rag. The bike smoked and fucking stank when I started it up and it heated. Probably about 4 weeks later I was washing the bike (just hot water - no cleaners added) and off it came no hassle, along with the shite and road grime.
PADDYOT is online now   ReplyReply
Old 7th October 2019, 01:31 PM #9
efanton efanton is online now
WSB Contender
 
Join Date: Jan 2016
Location: North Cork
Posts: 711
Motorbike: Suzuki GSX 600F
efanton efanton is online now
WSB Contender

 
Join Date: Jan 2016
Location: North Cork
Posts: 711
Rides: Suzuki GSX 600F
Re: Acf-50

Quote:
Originally Posted by Bruce View Post
Why put ACF50 on paintwork?
It's a corrosion inhibitor...
Polish your paint, ACF your metals...
Thanks.
Thats what I thought initially but then read on the web that some people are applying it to the entire bike.
efanton is online now   ReplyReply
Old 9th October 2019, 12:44 AM #10
RobbieBeGood's Avatar
RobbieBeGood RobbieBeGood is online now
Supporter
 
Join Date: Aug 2013
Location: Bray
Posts: 632
Motorbike: BusaK8 Versys650 Blade 08
Modifications: sack n' crack wax.
RobbieBeGood RobbieBeGood is online now
Supporter

RobbieBeGood's Avatar
 
Join Date: Aug 2013
Location: Bray
Posts: 632
Rides: BusaK8 Versys650 Blade 08
Mods: sack n' crack wax.
Re: Acf-50

Lads, polish removes a few microns of dulled clearcoat/paint from the surface to bring up the shine. You need to apply a wax of some description after polishing if you want to protect the paintwork.

Last edited by RobbieBeGood; 9th October 2019 at 12:46 AM.
RobbieBeGood is online now   ReplyReply
Old 10th October 2019, 10:37 PM #11
Jaded's Avatar
Jaded Jaded is offline
aah shite
 
Join Date: Feb 2011
Location: arkham asylum
Posts: 5,862
Motorbike: Gluaisrothar
Jaded Jaded is offline
aah shite

Jaded's Avatar
 
Join Date: Feb 2011
Location: arkham asylum
Posts: 5,862
Rides: Gluaisrothar
Re: Acf-50

Quote:
Originally Posted by RobbieBeGood View Post
Lads, polish removes a few microns of dulled clearcoat/paint from the surface to bring up the shine. You need to apply a wax of some description after polishing if you want to protect the paintwork.
This .If you want a tough as fuck wax I'd recommend soft 99s fusso coat .It's long lasting and very resistant to washes ect. It will last and is well capable of taking a beating over the winter months .not as super shiney as other waxs but perfect for the winter

Another thing to note is if it's after a respray does the paint not have to be left bare for a time after to let it fully gas out /cure ?
Jaded is offline   ReplyReply
Old 11th October 2019, 08:54 AM #12
pedrosixfour's Avatar
pedrosixfour pedrosixfour is offline
Supporter
 
Join Date: Jan 2017
Location: Laois/Offaly
Posts: 552
Motorbike: ZRX1200R
Modifications: Burbles
My Motorcycle Pics
pedrosixfour pedrosixfour is offline
Supporter

pedrosixfour's Avatar
 
Join Date: Jan 2017
Location: Laois/Offaly
Posts: 552
Rides: ZRX1200R
Mods: Burbles
My Motorcycle Pics
Re: Acf-50

Cheapest place to buy ACF-50?
pedrosixfour is offline   ReplyReply
Old 11th October 2019, 09:23 AM #13
TuneR TuneR is offline
Novice Racer
 
Join Date: Oct 2017
Location: Co. Limerick
Posts: 76
Motorbike: Kawasaki Ninja 650
TuneR TuneR is offline
Novice Racer

 
Join Date: Oct 2017
Location: Co. Limerick
Posts: 76
Rides: Kawasaki Ninja 650
Re: Acf-50

Quote:
Originally Posted by pedrosixfour View Post
Cheapest place to buy ACF-50?
No idea if cheapest Damien but i got mine from Lees online place motorcycleshop.ie.
TuneR is offline   ReplyReply
Old 11th October 2019, 10:56 AM #14
pedrosixfour's Avatar
pedrosixfour pedrosixfour is offline
Supporter
 
Join Date: Jan 2017
Location: Laois/Offaly
Posts: 552
Motorbike: ZRX1200R
Modifications: Burbles
My Motorcycle Pics
pedrosixfour pedrosixfour is offline
Supporter

pedrosixfour's Avatar
 
Join Date: Jan 2017
Location: Laois/Offaly
Posts: 552
Rides: ZRX1200R
Mods: Burbles
My Motorcycle Pics
Re: Acf-50

Quote:
Originally Posted by TuneR View Post
No idea if cheapest Damien but i got mine from Lees online place motorcycleshop.ie.
It turns out I'm living five minutes from the main Irish agent for the stuff Ger!

They're offering it @ €19.25/can and I can collect it myself.

Motorcycleshop is €19.90/can but free delivery would kick in with 3 cans.

Much the same really.

Although I could save the VAT if I buy direct from the distributor, making it €15.65/can

I suppose the other option is the larger bottle with the applicator, but it doesn't work out that much cheaper.

Last edited by pedrosixfour; 11th October 2019 at 11:00 AM.
pedrosixfour is offline   ReplyReply
Old 11th October 2019, 11:10 AM #15
sharpbikes's Avatar
sharpbikes sharpbikes is online now
MotoGP Legend
 
Join Date: Jan 2013
Location: Offaly
Posts: 2,249
Motorbike: vtr, zx7/9r, bandit
Modifications: inflatable doll underseat
sharpbikes sharpbikes is online now
MotoGP Legend

sharpbikes's Avatar
 
Join Date: Jan 2013
Location: Offaly
Posts: 2,249
Rides: vtr, zx7/9r, bandit
Mods: inflatable doll underseat
Re: Acf-50

Quote:
Originally Posted by pedrosixfour View Post

I suppose the other option is the larger bottle with the applicator, but it doesn't work out that much cheaper.
i got the larger bottle and a lidl paint gun for the compressor for a 10r and i use a tiny amount (30-40ml) to do a whole bike 2 or 3 times and because its misted on it gets everywhere. plus the bottle is pure liquid whereas the can is also containing propellant
sharpbikes is online now   ReplyReply
Old 11th October 2019, 11:32 AM #16
pedrosixfour's Avatar
pedrosixfour pedrosixfour is offline
Supporter
 
Join Date: Jan 2017
Location: Laois/Offaly
Posts: 552
Motorbike: ZRX1200R
Modifications: Burbles
My Motorcycle Pics
pedrosixfour pedrosixfour is offline
Supporter

pedrosixfour's Avatar
 
Join Date: Jan 2017
Location: Laois/Offaly
Posts: 552
Rides: ZRX1200R
Mods: Burbles
My Motorcycle Pics
Re: Acf-50

Quote:
Originally Posted by sharpbikes View Post
i got the larger bottle and a lidl paint gun for the compressor for a 10r and i use a tiny amount (30-40ml) to do a whole bike 2 or 3 times and because its misted on it gets everywhere. plus the bottle is pure liquid whereas the can is also containing propellant
That's a good idea.

Fuckin hate those hand-pump applicator bottles.

Last edited by pedrosixfour; 11th October 2019 at 11:34 AM.
pedrosixfour is offline   ReplyReply
Old 14th October 2019, 09:21 AM #17
TuneR TuneR is offline
Novice Racer
 
Join Date: Oct 2017
Location: Co. Limerick
Posts: 76
Motorbike: Kawasaki Ninja 650
TuneR TuneR is offline
Novice Racer

 
Join Date: Oct 2017
Location: Co. Limerick
Posts: 76
Rides: Kawasaki Ninja 650
Re: Acf-50

Quote:
Originally Posted by sharpbikes View Post
i got the larger bottle and a lidl paint gun for the compressor for a 10r and i use a tiny amount (30-40ml) to do a whole bike 2 or 3 times and because its misted on it gets everywhere. plus the bottle is pure liquid whereas the can is also containing propellant
Great idea, i have an old one i might try.

Quote:
Originally Posted by pedrosixfour View Post
That's a good idea.

Fuckin hate those hand-pump applicator bottles.
Ya did that on my N250 and it makes it very heavy in some places and light in others.
TuneR is offline   ReplyReply
Old Today, 10:43 AM #18
Kaos Theory Kaos Theory is offline
MotoGP Legend
 
Join Date: May 2007
Posts: 1,338
Motorbike: S1000R
Modifications: Clean...ish
Kaos Theory Kaos Theory is offline
MotoGP Legend

 
Join Date: May 2007
Posts: 1,338
Rides: S1000R
Mods: Clean...ish
Re: Acf-50

Quote:
Originally Posted by sharpbikes View Post
i got the larger bottle and a lidl paint gun for the compressor for a 10r and i use a tiny amount (30-40ml) to do a whole bike 2 or 3 times and because its misted on it gets everywhere. plus the bottle is pure liquid whereas the can is also containing propellant
This is the ideal way to apply it, you only need a tiny amount for a bike.
Kaos Theory is offline   ReplyReply
Reply

  Return to Main Topic Biker.ie Forums > General > The Workshop

Tags
acf50

Thread Tools



All times are GMT +1. The time now is 06:03 PM.

 

Irish Biker's Forum

If this is your first visit, be sure to check out the FAQ by clicking the link above. To start viewing messages, select the forum that you want to visit from the selection above. .