old restricters idea

[attila]

Originally Posted by chopper

im sure its a prob with the shop that issued that cert but have you any idea why the cery has the vin number penned in on it?, ive issued a good few and the vin number is needed BEFORE the certs issued and its printed on them not penned in

there is the vin nr. printed allright its only a plus its penned or I dontknow
To view pics on this biker's forum - your post count must be 2 or greater.

[gog]

Originally Posted by attila

Hello,
just found this thread, I have a restrictor with cert from a Suzuki dl-650 (2004).
The price is 1 pint of Guinnes.

Thanks Attila
To view pics on this biker's forum - your post count must be 2 or greater.

[attila]

welcome, safe riding!
To view pics on this biker's forum - your post count must be 2 or greater.

[chopper]

bump, several second hand kits been refitted to bikes now and its saved the bike owners a right few quid

[Theblackbaron]

Have one for an R6 Chop
no cert though, i lost it
any good to ya ?

[nogthebold]

question chop -

gonna have to go this route as I is honest joe - although restricting a zzr1100 would probably castrate it to level it wouldn't go fast enough to stay upright.

do you need the bike to fit restrictors - or as engine is likely to be out for head gasket / chain / shims etc could you work with the engine and carbs ?-

if your offer of shimming @ 180 or so is still current - theres not much more stripping for chain and gasket - it might make sense for me to deliver the lump and carbs to you and pay you the extra plus the restrictors in one go

[chopper]

Originally Posted by nogthebold

question chop -

gonna have to go this route as I is honest joe - although restricting a zzr1100 would probably castrate it to level it wouldn't go fast enough to stay upright.

do you need the bike to fit restrictors - or as engine is likely to be out for head gasket / chain / shims etc could you work with the engine and carbs ?-

if your offer of shimming @ 180 or so is still current - theres not much more stripping for chain and gasket - it might make sense for me to deliver the lump and carbs to you and pay you the extra plus the restrictors in one go

errr. id realy rather fit it to a whole bike and not just the motor , re:shims, if the motors out id say the shims would prob take about 50 labour and whatever shims are needed @5 a shim . defo less than 100

[chopper]

Originally Posted by Theblackbaron

Have one for an R6 Chop
no cert though, i lost it
any good to ya ?

yup, someone will use it

[nogthebold]

Originally Posted by chopper

errr. id realy rather fit it to a whole bike and not just the motor , re:shims, if the motors out id say the shims would prob take about 50 labour and whatever shims are needed @5 a shim . defo less than 100

To view pics on this biker's forum - your post count must be 2 or greater.
was thinking after that you'd need the bike details to cert - and what's to say that that engine actually went back into the bike - will get back to you re: shims - still waiting on CDI to find out if head gasket really cooked


just putting off the inevitable - I know I'm gonna have to drop the engine - problem is herself - bike looks grand outside the house complete - as soon as I strip it she's gonna regard it as "another pile of fuggin junk"
To view pics on this biker's forum - your post count must be 2 or greater.

[thomasg]

hey up chopper,,,ill be sending you 2 washers for a 01 transalp monday week,,
To view pics on this biker's forum - your post count must be 2 or greater.

To view pics on this biker's forum - your post count must be 2 or greater.

[chopper]

Originally Posted by thomasg

hey up chopper,,,ill be sending you 2 washers for a 01 transalp monday week,,
To view pics on this biker's forum - your post count must be 2 or greater.

To view pics on this biker's forum - your post count must be 2 or greater.

was wondering who sent them
To view pics on this biker's forum - your post count must be 2 or greater.

have a vtx1300 one there and a bros set,some sv and bandit ones on the way.

[Monsieur Noirtier de Villefort]

great idea
To view pics on this biker's forum - your post count must be 2 or greater.

[chopper]

Some bandit ones in there now .

[YAMER]

only saw this thread now, fair play chop
To view pics on this biker's forum - your post count must be 2 or greater.

[Cobra]

Well Chopper, I was looking for a set for a 92 cb400, Any about? How much to get new? Cheers.

[Chuck Noris]

ill make a list of the restrictors sent/available on this thread if needed.

good idea or bad idea ?[/QUOTE]

great idea i may need one soon well done chopper
To view pics on this biker's forum - your post count must be 2 or greater.

[vavaVROOM]

cool. any for an 99 er5?? :)
my insurance is willing to think about dyno/ mechanic cert... i can fit them myself (well, one of the lads will
To view pics on this biker's forum - your post count must be 2 or greater.
) but i can't find the actual washers, no more on ebay
To view pics on this biker's forum - your post count must be 2 or greater.
anyone have some to give me? i'd consider going to see chopper if thats the only way but he's a bit out of the way.


To view pics on this biker's forum - your post count must be 2 or greater.

[chopper]

Originally Posted by vavaVROOM

cool. any for an 99 er5?? :)
my insurance is willing to think about dyno/ mechanic cert... i can fit them myself (well, one of the lads will
To view pics on this biker's forum - your post count must be 2 or greater.
) but i can't find the actual washers, no more on ebay
To view pics on this biker's forum - your post count must be 2 or greater.
anyone have some to give me? i'd consider going to see chopper if thats the only way but he's a bit out of the way.


To view pics on this biker's forum - your post count must be 2 or greater.

yea ive some , ill send ya them if needed

[vavaVROOM]

Originally Posted by chopper

yea ive some , ill send ya them if needed

YES please and thank you sooo much... i'll buy you a pint... no idea how but i'll manage
To view pics on this biker's forum - your post count must be 2 or greater.

what you want for them??

i dont have pm's yet. mail me and i'll mail you my address
To view pics on this biker's forum - your post count must be 2 or greater.



thank you thank you thank you thank you thank you thank you
To view pics on this biker's forum - your post count must be 2 or greater.

To view pics on this biker's forum - your post count must be 2 or greater.

To view pics on this biker's forum - your post count must be 2 or greater.

To view pics on this biker's forum - your post count must be 2 or greater.

To view pics on this biker's forum - your post count must be 2 or greater.

[vavaVROOM]

hey, found your email on poleon. sent you a mail :thumsup2:
hope you dont mind.