|
|
#1
13th March 2012, 07:58 PM
|
|||
|
|||
Bandit indicator issue
Right folks, the "Pass" switch wasnt working on the Bandit so i took the switch gear off the handlebars and cleaned the spring infront of the switch, just some dust and grime, works fine now again.
When everything was put back i was trying all the buttons and the right rear indicator wasnt working, front right flashing x2 all LHS fine. Opened the switch gear again and cleaned everything incl the indicator mechanism. put back together, same issue. Swapped right rear with left rear bulbs now the same issue is on both, ie. not working and fronts flashing x2. How do i check if its an earth fault or the relay or any other thing it could be ? Thanks in advance ! 
|
|
#4
14th March 2012, 07:15 PM
|
|||
|
|||
|
Re: Bandit indicator issue
Well, The rhs was working this morning....??
Took off the lhs and found a broken wire, not sure it it broke free when i was removing it but reconnecting it by hand made it all work again. Soldered the wire back to the connector and managed to lose the spring when it popped out... To view pics on this biker's forum - your post count must be 2 or greater. Off to the for sale section to see if anyone has a spare rear indicator for a 99 bandit.
|
|
#6
14th March 2012, 07:52 PM
|
||||
|
||||
|
Re: Bandit indicator issue
Originally Posted by oleras
If its the boxy one I might have one at home.
|
|
#7
14th March 2012, 08:01 PM
|
|||
|
|||
|
Re: Bandit indicator issue
Originally Posted by jellikit
Whole job i need, kinda mutilated it a bit...
To view pics on this biker's forum - your post count must be 2 or greater.
|
