![]() |
|
#1
|
||||
|
||||
|
4 or €500 for a proper bike lift, too dear for the use it will get. So.......
Lidl winch €70 Timber €30 Fixings €10 Acting the maggot...................... priceless To view pics on this biker's forum - your post count must be 2 or greater. |
|
#5
|
||||
|
||||
|
Lidl winch €70
Timber €30 Fixings €10 Workshop roof cave in on top of ya, hole in roof, bike knocked over, untold damage,... To view pics on this biker's forum - your post count must be 2 or greater. ..................... priceless. To view pics on this biker's forum - your post count must be 2 or greater. |
|
#6
|
||||
|
||||
|
Saves d'oul back big time, plus can then easily jack to whatever I want, Lift again and slip in timbers, whatever is needed.
To view pics on this biker's forum - your post count must be 2 or greater. |
|
#7
|
||||
|
||||
|
Originally Posted by Road warrior
I used loads of planks.
To view pics on this biker's forum - your post count must be 2 or greater. |
|
#8
|
||||
|
||||
|
Originally Posted by HIGHSIDER
And the weakest link is ????????????????
|
|
#9
|
||||
|
||||
|
acting the maggot is truely priceless, looks like good craic until what ya winched up suddenly decides to make its way back down without notice
|
|
#13
|
||||
|
||||
|
ffs.. 12x2 beam.. along long as its supported one would take that bikes weight let alone two of them!!..
Always lads to diss a guys ways.. Ye must all be fucking structural engineers are ye? To view pics on this biker's forum - your post count must be 2 or greater. |
|
#14
|
||||
|
||||
|
Originally Posted by HIGHSIDER
Wrong!
To view pics on this biker's forum - your post count must be 2 or greater. |
|
#15
|
||||
|
||||
|
Originally Posted by LittleBlackBlade
The effort now required is the press of a switch.
To view pics on this biker's forum - your post count must be 2 or greater. |
|
#16
|
||||
|
||||
|
Originally Posted by Road warrior
just what i was gonna say
To view pics on this biker's forum - your post count must be 2 or greater. |
|
#17
|
||||
|
||||
|
Originally Posted by dvgenius
That's what you keep in mind when putting it together. Making sure it don't happen. Bike kerbs at 260 KG.
|
|
#18
|
||||
|
||||
|
Originally Posted by hedzball
Correct. Two beams supporting a 600 kg rated bar that the winch is bolted to.
To view pics on this biker's forum - your post count must be 2 or greater. |
|
#19
|
||||
|
||||
|
Originally Posted by hedzball
God bless your eyesight..
To view pics on this biker's forum - your post count must be 2 or greater. |
|
#20
|
||||
|
||||
|
Originally Posted by HIGHSIDER
To view pics on this biker's forum - your post count must be 2 or greater. To view pics on this biker's forum - your post count must be 2 or greater. To view pics on this biker's forum - your post count must be 2 or greater. |