cbr100f cam tensioner

redto · #1 30th January 2011, 08:49 PM

hey all, lookin for bit of info, whats the story with the tensioners on a 96 cbr1000f, are they difficult to replace? expensive?

thanks

~~johnmac~~ · #2 30th January 2011, 08:50 PM

seen the ad on done deal didnt you
To view pics on this biker's forum - your post count must be 2 or greater.

redto · #3 30th January 2011, 09:05 PM

yeah might go take a look tomorrow

bakey78 · #4 31st January 2011, 12:30 AM

surely get a manuel tensioner for it anyways,,wudnt mind a manuel for me wan either in the pic
To view pics on this biker's forum - your post count must be 2 or greater.

jambo · #5 31st January 2011, 09:00 AM

that bike is not a 96 it's one of the older models 86-92

redto · #6 31st January 2011, 10:13 AM

really, thanks jambo

**chopper** · #7 31st January 2011, 10:50 AM

No manual tensioners, the cct is internal in em, rocker cover off jobbie, new one might cure the rattle, might not. Even if it does it will come back after a while.
There's chains in the bottom ends too that make a racket, they are non adjustable and are a full strip to replace

redto · #8 31st January 2011, 01:58 PM

Originally Posted by chopper

No manual tensioners, the cct is internal in em, rocker cover off jobbie, new one might cure the rattle, might not. Even if it does it will come back after a while.
There's chains in the bottom ends too that make a racket, they are non adjustable and are a full strip to replace

cheers chopper, I had a look at the bike. I passed.

Bandit Fighter · #9 1st February 2011, 01:00 AM

Originally Posted by redto

cheers chopper, I had a look at the bike. I passed.

That bad?????

GaryMunster · #10 1st February 2011, 01:04 AM

linky for the bike?

Bandit Fighter · #11 1st February 2011, 01:11 AM

Originally Posted by GaryMunster

linky for the bike?

To view pics on this biker's forum - your post count must be 2 or greater.

To view pics on this biker's forum - your post count must be 2 or greater.

LittleBlackBlade · #12 1st February 2011, 01:18 AM

little brazzer to do!

GaryMunster · #13 1st February 2011, 01:19 AM

Originally Posted by Bandit Fighter

To view pics on this biker's forum - your post count must be 2 or greater.

To view pics on this biker's forum - your post count must be 2 or greater.

To view pics on this biker's forum - your post count must be 2 or greater.

redto · #14 2nd February 2011, 10:01 PM

Originally Posted by GaryMunster

To view pics on this biker's forum - your post count must be 2 or greater.

I was figurin I might buy it, do the cam tensioner an maybe make a few bucks, as im out of work at moment. The battery was flat, but I did not even ask him to start it. If ya lookin for that kind a bike, I'm sure it would be fine.

bakey78 · #15 3rd February 2011, 01:56 AM

Originally Posted by jambo

that bike is not a 96 it's one of the older models 86-92

taught that meself but gave it the benifit of the doubt as it wasa 1000cc modle cbr and not a fireblade of that erra
To view pics on this biker's forum - your post count must be 2 or greater.

the landshark · #16 3rd February 2011, 11:38 AM

you'd pick up a minter for very little more atm